Mould Release Agents



BSK RITE RELEASE XL

DESHUTTERING OIL – WATER BASE EMULSIFIED MOULD RELEASE CHEMICALS


Description

RITE RELEASE XL is a concentrated and emulsified chemicals work for mould release agent based on mineral oils, when mixed with water at 1:5 dilutions it produces a thin film of stable release agent.


Technical Data
  • Physical State : Dark colored liquid
  • Specific Gravity(30oC) : 0.95 – 0.98 +- 0.02
  • Odour : Ester / Alkyd
  • Viscosity : 40 - 45 Sec
  • Flash Point : 175oC
  • Solubility : Soluble in Water
  • Coverage : 25 – 35 Sq. Meter
  • Dilution rate : 1:5 with Water

Composition

BSK RITE RELEASE XL is carefully blended combination of refined emulsified mineral oil and chemical release agents.


Benefits & Advantages
  • Non – Staining concrete surfaces
  • Fast and easy strapping
  • Suitable for all types of form works/moulds
  • Increases life of formwork
  • Reduces concrete contamination
  • Gives fair-faced concrete finish
  • Requires water for dilution
  • Economical and easy to use
  • Cost effective for storage and transportation

Purpose

Product is used for easy stain free release of concrete moulds and formwork of all types


Form Work Surfaces

The product may be used on wooden or metal surfaces. Particularly effective on resinous coated surfaces.


Method of usage
  • Mixing: First dilute RITE RELEASE XL in the proportion of 1litre to 5litre of water using a clean container on stirring thoroughly until evenly mixed. If the solution is not used on the same day it should be stirred again before use.
  • Application: Apply the solution to the face of the formwork by spray brush or cloth. Only one coat should be applied (As thinly as possible) and allow to dry. If the formwork is not sued for several days then only a further coat may be applied.

Coverage

25 to 35 Sq. Meter / per Liter when diluted with water depending on the surface texture and porosity of the formwork


Packing

Available in 50, 100, 210 Ltrs. Drums


Properties

This product has an out standing releasing properties and advantages over conventional oil. It may react with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy strapping from the hardened concrete.


Handling precautions & safety

This product is an industrial chemicals and inflammable. Proper care should be taken. Rubber gloves and goggles should used. Skin contact should be avoided.


Storage

Product has a shelf life of 1 year if stored under 50oC in unopened condition. Diluted product should be used within 5 days

RITE RELEASE – SPL

DESHUTTERING OIL – OIL BASE READY TO USE CHEMICAL SHUTTER- RELEASE AGENT


Description

RITE RELEASE SPL is a ready to use Shutter release agent with non staining properties for any type of formwork. It is a mixing of mineral oils and special chemical with good shutter release property with out staining on concrete.


Technical Data
  • Physical State : Amber / yellow Liquid
  • Specific Gravity(30oC) : 0.90 – 0.91 +- 0.02
  • Odour : Ester / Alkyd
  • Viscosity : 20 - 25 Sec
  • Flash Point : 150 - 160oC
  • Solubility : Diesel / Kerosene
  • Coverage : 35 – 50 Sq. Meter
  • Dilution rate : Not applicable – Direct to use

Composition

BSK RITE RELEASE SPL is a mixing of special chemicals & minerals having good release properties for any type of formwork.


Benefits & Advantages
  • Ready to use
  • Non – staining concrete surfaces
  • Fast and easy-strapping
  • Suitable for all types of form works/moulds
  • Increases life of formwork
  • Reduces concrete contamination
  • Gives fair-faced concrete finish
  • Economical and easy to use
  • Cost effective for storage and transportation
  • Can be used safely with white cement because of non staining property.

Purpose

Product is used to achieve fair faced concrete


Form Work Surfaces

The product may be used on wooden or metal surfaces. Particularly effective on resinous coated surfaces.


Method of usage
  • No preparation is necessary but if extensive re-use of timber mould. It is advisable to protect all new surfaces with RITE RELEASE SPL. For used mould all excess cement must be removed together with any surface deposits of previous oil.
  • Application: Should be applied by brush sponge or mould oil sprayer. If sprayer is used, care should be taken to choose the correct size of sprayer. Apply one thin coat on entire surface, thinnest coating necessary to achieve effective coverage. Excessive application may lead to surface dusting and an economical too. Wipe or brush of any excess particles on the surface and apply one coat of RITE RELEASE SPL. Before to remove RITE RELEASE SPL completely for recoating mould or shutter surface, use strong industrial detergent together with stiff brushing then thoroughly rinse with water.

Coverage

35 to 50 Sq. Meter / per Liter is possible depending upon the porosity and texture of surface. Ensure good ventilation & do not smoke during use.


Packing

Available in 50, 100, 210 Ltrs. Drums


Properties
  • Suitable for use with steam cured concrete
  • It’s effective on both wood & metal shutter & mould and can be used safely with white cement because of non staining property.

Handling precautions & safety

This product is not health hazard. Proper care should be taken. Rubber gloves and goggles should used. Remove splashes on the skin with soap & water. Avoid contact with eyes and accident contamination should be washed thoroughly with plenty of water and seek medical treatment. Ensure good ventilation & do not smoke during use


Storage

Product has a shelf life of 1 year and should be stored in manufacturers sealed container in frost free condition out of direct sunlight.

BSK RITE RUST CONVERTER

  • Registered office
  •   Regd. Off. 201,
         Pratham Tower, Nr. Queens Park,
         Mira Road (E), Thane – 401 107
  • info@ritezone.in

  • Corporate office
  •   G-7, SHAKTI 243,
         OPP. HILL DARSHAN AVENUE
         SANDESH PRESS ROAD, BODAKDEV
         AHEMDABAD – 380 054. GUJARAT
  •   +91-79-6522 9608

  •      Suresh Prajapati
          (Director - Techno Commercial)
  •   +91 9904083255
  • Mumbai Branch office
  •   B-256, ORCHID MALL,
         Royal Palm Complex, Nr. Mayur
         Nagar, Aarey Colony, Goregaon (E),
         Mumbai – 400 065.

  •      Bhavesh B. Bhandari
          (Director - Techno Commercial)
  •   +91-9323963136/91+8238055381
  • bhavesh@ritezone.in