Concrete Admixtures



BSK FLUID SP – 151 M

SUPER PLASTICIZER CUM HIGH RANGE WATER REDUCING ADMIXTURE


Description

BSK FLUID SP 151 M is a super plasticizer cum high rage water reducing admixture for concrete & mortars. It disperses whole particles in mix which create extreme fluidity in concrete & it retain for a longer time. It also provides very high water reduction. BSK FLUID SP 151 M conforms to specification prescribed in IS 9103 and ASTM C-494 Type A & F.


Technical Data
  • Physical State : Brownish Free flowing liquid
  • Specific Gravity : 1.20 + 0.02
  • Solid Contains : 43%+ 3%
  • Chloride contant : Nil
  • pH : 7-8
  • Air entrainment : <1.0% over control mix>

Composition

BSK Fluid SP 151 M is a brown free flowing liquid based on selected synthetic Sulphonated Naphthalene formaldehyde condensates. Chloride free.


Benefits & Advantages
  • Produce low water cement ratio as it allow water reduction up to 35 - 40% , Ultra high water reduction
  • Flow able mix with out bleeding and segregation
  • Ability to attain difficult combinations of high – early and late-age compressive strengths
  • Workability retention with out retardation
  • Increase productivity, Improved operational efficiencies, Less QC Supports
  • Fewer rejection loads & faster form turnover used in large range of concrete
  • Reduction in patching cost
  • Chloride free, Reduction in shrinkage & cracks
  • Less permeable & hence more durable concrete
  • It maintain slump significantly longer than concrete containing naphthalene, melamine based admixture
  • It achieved slump retention without affecting rate of hardening or early age compressive strength development

Application / Area of usage
  • Production of Concrete from M10 up till M50 even M60 grade also
  • Concrete where high flow ability, increased stability and durability are needed
  • Precast Concrete, Pumping Concrete, mass concrete
  • Concrete require high early compressive strength development
  • Application requiring workability retention without retardation
  • Concrete with Ultra High Water reduction with very Low water/ Cement ratio concrete

Application / Area of usage
  • Ready Mix Concrete
  • Precast & pre-stressed concrete
  • Pumping Concrete, mass concrete
  • Heavily reinforced concrete
  • Highly slump, flow able concrete
  • Floor slabs, foundation, walls, columns, beams, ceilings etc.
  • In other civil construction like roads, bridges, tunnel, canal lining, paving, spun pipes etc.
  • Low water/ cement concrete

Compatibility
  • It can be used with all types of PPC & OPC cement, SRC (Sulphate Resistance Cement), GGBS (Slag), Fly Ash & Micro Silica, Silica Fumes
  • It is also compatible with all air entraining agent which complies to with IS 9103 – 2003 and integral water proofing compound which complies with IS 2645-1978, if other admixture are to be used in concrete containing BSK OPTIMA PC 250 - M , then they must be dispended separately

Method of use
  • BSK OPTIMS PC 250 - M shall be mix to the concrete at the end of the mixing cycle. It is recommended to first add 60% to 70% of batch water to the concrete and then add BSK OPTIMA PC 250 - M to the concrete with remaining 30% to 40% of the batch water at the end of mixing cycle. It is necessary to mix the same at high speed at 1 minute per M3 of concrete (for minimum 3 minutes)
  • Before add this admixture you should first check the SSD conditions, plant aggregates to get the best desire results. However, optimum water reduction is generally obtained with delayed addition.

Dosage

Recommended dosage of BSK OPTIMA PC 250 - M is 0.7% to 1.4% of Weight of Cement /Cementitious materials as per the Grade of Concrete. It is advisable to carry out plant trials to know the exact optimum dosage rate depending up on the SSD conditions. Dosage may go high above recommended range to get higher performance of concrete due to variations in concrete materials, job site conditions and or application as well as atmosphere climatic condition etc.


Packing

Available in 100, 200 or 225 kgs Drums or in bulk quantity (tanker load)


Health & safety
  • BSK OPTIMA PC 250 - M is a non- toxic, harmless, inflammable
  • If its direct contact with our skin or body or Any splashes on the skin should be washed immediately with cold water
  • If splashes on the eye then eye should be washed immediately with normal water or seek medical advice

Storage

Store cool, dry place under shed or store room away from heat, frost and keep unopened condition. If the product frozen then it will recover its properties after thawing and agitating. Avoid prolonged exposure to high temperatures. Store in plastic containers.


Shelf life

BSK OPTIMS PC 250 - M has a shelf life of one year in original packing unopened condition protect from direct sunlight & frost.

BSK RITE WR

BSK FLUID RP 101

BSK OPTIMA PC 250 M

NEW GENERATION MID PC WITH HIGH RANGE OF WATER REDUCING ADMIXTURE CUM PLASTICIZER


Description

BSK OPTIMA PC 250 - M is a New Generation high water reducing super plasticizer admixture for concrete based on MID RANGE modified polycarboxylate. It is especially designed for Concrete Mixer with very low W / C Ratio Concrete. It will allow the concrete to have an increased period of workability even at very low W / C ratio. It is particularly recommended for ready mix concrete producing Flowable Concrete and civil engineering constructions project & site. BSK OPTIMA PC 250 - M is particularly adapted to obtain high workability retention with cement which hardly obtains such a characteristic & it also allows an important high water reduction & increase workability of the concrete. BSK OPTIMA PC 250 - M is highly recommended and particularly adapted for flowable Concrete with Concrete grade M10 to M50 Even M60. It is effective in improving the day today consistency of concrete mixture & accomplished by providing unparalleled slump retention with out compromising early compressive strength development and setting time. Workability retention helps to maintain more consistent performance in each and every batch therefore improving operational efficiency. BSK OPTIMA PC 250 - M conforms to specification prescribed in IS 9103-1999 and ASTM C-494-86 Type F.


Technical Data
  • Physical State : Amber color Free flowing liquid
  • Specific Gravity : 1.112 + 0.02 28oC
  • Chloride contant : Nil
  • pH : 6.5 +- 1.0
  • Na2O : <0.10%

Composition

BSK OPTIMS PC 250 - M is a amber color free flowing liquid based on MID rage modified polycarboxylate molecular designed with a precise understanding of regional cements to provide specific and exceptional value to all phases of the concrete constructions process. It is Chloride free.


Benefits & Advantages
  • Produce low water cement ratio as it allow water reduction up to 35 - 40% , Ultra high water reduction
  • Flow able mix with out bleeding and segregation
  • Increase retention time
  • Produces low water cement ratio as it allow water reduction up to 20% to 30%
  • Remarkable increase in both early and ultimate strengths.
  • Chloride free, Reduced shrinkage & cracks. Also recommended for pre-stressed concrete
  • Give stable Air – Void system, Rapid placing with no vibration
  • Compacted durable concrete, resistant to extreme thermal
  • Improved surface finish (fine finishing )

Purpose
  • To impart very high workability without the addition of extra water or to enable large water reductions to be made for higher early & ultimate strength. To improved surface finish, improved water tightness no adverse shrinkage effect especially suitable for congested & heavily reinforce concrete.
  • It greatly produce flowing concrete with higher strength in comparison of normal strength this flow able concrete allows rapid placing of concrete with little or no vibration & makes the concrete denser for increased durability.

Application / Area of usage
  • Ready Mix Concrete
  • Precast & pre-stressed concrete
  • Pumping Concrete, mass concrete
  • Heavily reinforced concrete
  • Highly slump, flow able concrete
  • Floor slabs, foundation, walls, columns, beams, ceilings etc.
  • In other civil construction like roads, bridges, tunnel, canal lining, paving, spun pipes etc.
  • Low water/ cement concrete

Compatibility

It can be used with all types of PPC & OPC cement, SRC (Sulphate Resistance Cement), GGBS (Slag), Fly Ash & Micro Silica


Application / Area of usage
  • It is added to part of the mixing (Gauging) water. It should not come in to contact with dry cement.
  • Before add this admixture you should first check the water absorption as well as moisture content and make correction accordingly in your mix design to get the best desire results.
  • Take all the concrete materials as per the design in the proper order in to the mixer with about 65 to 70% of the mixing water and mix for 3-4 minutes. Add balance quantity of water with admixture to obtain the required slump and mix for 3 -4 additional minutes.

Dosage

0.4% to 1.8% by weight of cement. It is advisable to carry out plant trials to know the exact optimum dosage rate depending up on the SSD condition as well as require retention, workability etc. Overdosing should be avoided. Due to over dosing setting time will be extended & it may produce concrete which may to segregate would retard setting of concrete.


Packing

Available in 50, 100, 250 kgs Drums or in bulk quantity (tanker load)


Health & safety
  • BSK Fluid SP 151 M is a non- toxic
  • If its direct contact with our skin or body or Any splashes on the skin should be washed immediately with normal water
  • If splashes on the eye then eye should be washed immediately with normal water or seek medical advice

Storage

Store cool, dry place under shed or store room away from heat, frost and keep unopened condition.


Shelf life

BSK Fluid SP 151 M has a shelf life of one year in original packing unopened condition protect from direct sunlight & frost.

BSK OPTIMA PC - HG

NEW GENERATION HIGH PC WITH VERY MUCH HIGH RANGE OF WATER REDUCING ADMIXTURE CUM PLASTICIZER


Description

BSK OPTIMA PC - HG is a New Generation very higher water reducing super plasticizer admixture for concrete based on HIGH RANGE modified polycarboxylate. It is especially designed for Concrete Mixer with very very low W / C Ratio Concrete. It will allow the concrete to have an increased period of workability even at very low W / C ratio. It is particularly recommended for ready mix concrete producing self compatible Concrete, High Grade Concrete and civil engineering constructions project & site. BSK OPTIMA PC - HG is particularly adapted to obtain high workability retention with cement which hardly obtains such a characteristic & it also allows an important high water reduction & increase workability of the concrete. BSK OPTIMA PC - HG is highly recommended and particularly adapted for Higher Grade of Concrete M60 and above and for SCC Concrete (Self Compatible Concrete). It is effective in improving the early compressive strength development and setting time. Workability retention helps to maintain more consistent performance in each and every batch therefore improving operational efficiency. BSK OPTIMA PC - HG conforms to specification prescribed in IS 9103-1999 and ASTM C-494-86 Type F.


Technical Data
  • Physical State : Amber color Free flowing liquid
  • Specific Gravity : 1.201 + 0.02 @28oC
  • Solid / Dry Materials : 43.78 + 3%
  • Chloride contant : Nil
  • pH : 6.5 + 1.0
  • Na2O : <0.10%

Composition

BSK OPTIMS PC 250 - M is a amber color free flowing liquid based on MID rage modified polycarboxylate molecular designed with a precise understanding of regional cements to provide specific and exceptional value to all phases of the concrete constructions process. It is Chloride free.


Benefits & Advantages
  • Produce low water cement ratio as it allow water reduction up to 40 - 45% , Ultra high water reduction
  • Flow able mix with out bleeding and segregation
  • Ability to attain difficult combinations of high – early and late-age compressive strengths
  • Workability retention with out retardation
  • Increase productivity, Improved operational efficiencies, Less QC Supports
  • Fewer rejection loads & faster form turnover used in large range of concrete
  • Less permeable & hence more durable concrete
  • It maintain slump significantly longer than concrete containing naphthalene, melamine based admixture
  • It achieved slump retention without affecting rate of hardening or early age compressive strength development

Application / Area of usage
  • Production of Self Consolidating Concrete (SCC – mixture)
  • To use for Higher Concrete Grade M55, M60 & above grade of Concrete
  • Concrete where high flow ability, increased stability and durability are needed
  • Precast Concrete, Pumping Concrete, mass concrete
  • Concrete require high early compressive strength development
  • Application requiring workability retention without retardation
  • Flow able Concrete with Ultra High Water reduction with very Low water/ Cement ratio concrete

Compatibility

It can be used with all types of PPC & OPC cement, SRC (Sulphate Resistance Cement), GGBS (Slag), Fly Ash & Micro Silica, Silica Fumes

It is also compatible with all air entraining agent which complies to with IS 9103 – 2003 and integral water proofing compound which complies with IS 2645-1978, if other admixture are to be used in concrete containing BSK OPTIMA PC - HG , then they must be dispended separately


Method of use
  • BSK OPTIMS PC - HG shall be mix to the concrete at the end of the mixing cycle. It is recommended to first add 60% to 70% of batch water to the concrete and then add BSK OPTIMA PC - HG to the concrete with remaining 30% to 40% of the batch water at the end of mixing cycle. It is necessary to mix the same at high speed at 1 minute per M3 of concrete (for minimum 6 minutes)
  • Before add this admixture you should first check the SSD conditions, plant aggregates to get the best desire results. However, optimum water reduction is generally obtained with delayed addition.

Dosage

Recommended dosage of BSK OPTIMA PC - HG is 250ml to 1000ml / 100 Kgs of Weight of Cement /Cementitious materials. It is advisable to carry out plant trials to know the exact optimum dosage rate depending up on the SSD conditions. Dosage may go high above recommended range to get higher performance of concrete due to variations in concrete materials, job site conditions and or application as well as atmosphere climatic condition etc.


Packing

Available in 110, 225 kgs Drums or in bulk quantity (tanker load)


Health & safety
  • BSK OPTIMA PC - HG is a non- toxic, harmless, inflammable
  • If its direct contact with our skin or body or Any splashes on the skin should be washed immediately with cold water
  • If splashes on the eye then eye should be washed immediately with normal water or seek medical advice

Storage

Store cool, dry place under shed or store room away from heat, frost and keep unopened condition. If the product frozen then it will recover its properties after thawing and agitating. Avoid prolonged exposure to high temperatures. Store in plastic containers.


Shelf life

BSK OPTIMS PC - HG has a shelf life of one year in original packing unopened condition protect from direct sunlight & frost.

BSK RITE WL

BSK RITE AIRENT

RITE SHOT ACF

Alkali Free Liquid Accelerator for Sprayed Concrete & Mortars


Description

Accelerator is completely alkali free setaccelerator available in liquid form for use with sprayed concrete for guniting,shortcreting etc.


Standard

Conforms to IS 9103-1999 (reaffirmed 2004) Edition 2.2 (2007-2008), ASTM C494/C494-08a, Type C, BS EN 934 and Efnarc specification of sprayed concrete.


Properties
  • Form : Liquid
  • Colour : Light Yellow
  • Specific Gravity : 1.39+ 0.03 @ 27oC + 3oC : 43.78 + 3%
  • Chloride contant : Nil(as per EN 934)
  • Air Entrainment : Nil

Composition

BSK OPTIMS PC 250 - M is a amber color free flowing liquid based on MID rage modified polycarboxylate molecular designed with a precise understanding of regional cements to provide specific and exceptional value to all phases of the concrete constructions process. It is Chloride free.



Consistency

Accelerator is formulated with selective alkali freeingredients and is manufactured under controlled conditions to give a consistent product.



Handling

Accelerator is formulated from chemicals which has no fire or health hazard.



Storage

If stored in undamaged sealed containers in dry condition at normal ambient temperatures, a shelf – life of 04 months can be expected.



Typical Dosage

Typical Dosage should be in between 4 – 7% by weight of cement depending upon the site requirement and ambient temperature. Maximum dosage upto 8% is permissible. Material must be stirred well before use to avoid any kind of settlement at the bottom of accelerator tank.



Benefits & Advantages

Alkali free ensures safer handling and operating condition in work place and does not encourage alkali aggregate reaction, hence produce sound concrete.High build enables faster coverage with reduced rebound. Can be applied more than 50 mm thickness in one application. Allows spraying to take even on wet surface with running water. Rapid setting leads to higher build spray and contributes good water tightness.
Does not contain any chloride.
Develops high early strength.


Uses

Accelerator is used for sprayed concrete and mortar in galleries, tunnels, retaining walls, embankments, tank lining etc. Cement mortar admixed with RITE SHOT ACF sets rapidly; hence faster placing of higher thickness in one application is possible.


Compatibility

Accelerator is compatible with other admixtures in same concrete mix. All admixtures should be added to the concrete separately. It is suitable to all types of OPC and cement replacement material such as PFA, GGBFS and Silica Fumes.


Warranty

Our products are manuf actured under stringent National / International quality norms and guaranteed against any manuf acturing def ect. Recommendation as per this data sheet are based on our team’s combined practical experience and exposure ov er 20 y ears in the field of construction and are believ ed to be most appropriate. Howev er, no liability can be accepted by us, as the conditions of use of such products are bey ond our control.


Technical Service
  • RITE ZONE has an advisory service on concrete mix design & application of right products at right place, can be contacted if assistance is required..
  • RITE ZONE maintains a technical division with highly qualified Technical Personnel to investigate and advise on subjects related to concrete and the Construction Industry. The Division will advise on the correct use and selection of right products at the right place.
  • RITE ZONE undertakes Consultancy Service for diagnosis and rehabilitation of distressed structures; undertakes / delegates jobs as a package for total waterproofing system with guarantee.

Product Information

Although the basic formulation of our products generally remains unchanged production refinements arising from continuing research and evolution program may occasionally results in marginal changes in properties.



BSK RITE BLOCKMIX

BSK RITE FIBRE

BSK RITE HYDRATITE

BSK RITE FINISH 4016 SR

  • Registered office
  •   Regd. Off. 201,
         Pratham Tower, Nr. Queens Park,
         Mira Road (E), Thane – 401 107
  • info@ritezone.in

  • Corporate office
  •   G-7, SHAKTI 243,
         OPP. HILL DARSHAN AVENUE
         SANDESH PRESS ROAD, BODAKDEV
         AHEMDABAD – 380 054. GUJARAT
  •   +91-79-6522 9608

  •      Suresh Prajapati
          (Director - Techno Commercial)
  •   +91 9904083255
  • Mumbai Branch office
  •   B-256, ORCHID MALL,
         Royal Palm Complex, Nr. Mayur
         Nagar, Aarey Colony, Goregaon (E),
         Mumbai – 400 065.

  •      Bhavesh B. Bhandari
          (Director - Techno Commercial)
  •   +91-9323963136/91+8238055381
  • bhavesh@ritezone.in